NEW Replacement Part - Whirpool Dryer Thermistat Kit Part# 3977393

This got my dryer working Again!!!
Pros - one part fit very well.
Con - the second part had a jumper wire, but it was not exactly like the one I had.
I did not install this part. The other part I installed and it made my dryer work at getting HOT again...

Seem to have thought this out
The replacement kit worked perfectly. I thought I was ordering a single part but they also sent another part that must have been failed if this part was failed. I was about to make a trip to town to get a certain connector I needed in my particular application but i took another look through the package and there it was!

The price was also outstanding.

Saved Us Money
When our dryer stopped heating I was sure it was time to replace it. It is old enough that I didn't even know if a service call was in order. Thought I was going to have to buy a new dryer. A little research on You Tube, found this may be the culprit and for the low prices of this product my dryer is good as new!

Click to Editorial Reviews

Whirlpool 4317943 Ice Maker Replacement Kit RIM943

Whirlpool Replacement Icemaker
This was exactly the part I needed for my broken Whirlpool icemaker. This kit came with several different wiring harnesses and attachment clips to choose from, but in my case, I was able to unplug the old wiring harness and plug it directly into the new unit. I have a side by side and it was a little awkward to remove the old icemaker since there was not a lot of room to work. But I was able to do the whole swap in about 15 minutes. First, I'd advise you turn off the fridge. I removed the three screws holding on the old icemaker and then using a small slotted screwdriver removed the old wiring harness that plugged into the icemaker. I then removed a plastic bracket from the bottom that held the 3rd screw in place and attached it to the new unit. Inspect your old unit to see the if your unit requires a cutout where the water lines comes into the icemaker. This unit doesn't have the cutout, but it is prescored if you need a cutout. All you have to do is use a pair of cutters to...

Works, Great Price, not exactly as pictured
The good:
1. The ice maker fits in my KitchenAid refrigerator and it works.

2. The price was right: $54 w/ free shipping.

3. The ice maker comes with more wire harnesses than shown in the picture. I'd recommend anyone who buys this, keep their old ice maker as you may want to 'recycle' your old wire harness just in case.

The not so good:
1. The fill cup needed to be modified to accept the fill tube. It's molded in such a way as to make this modification easy, however, in my case when I tried to cut it, it developed a couple of cracks. Sounds worse than it is. Not even a drop falls outside of the ice maker -- it's just a funnel. But the quality of this part is suspect - they should have used a softer, less brittle plastic that would cut easier.

2. The picture shows two shut off arms (the bent silver wire). Mine only came with one and it wasn't the one I needed. The shut off arm from my original ice maker fit in perfectly, so...

Works as advertised
This ice maker was a direct replacement for mine (Whirlpool PN# 4317943), even used the existing wiring harness. My OEM unit had an "ice maker plus" attachment snapped to the front that is basically a small fan housing that blows air across the ice tray. The white cover pictured pops off and the ice maker plus snapped right into its place. Three small Phillips head screws hold the unit in place in the freezer, the wiring harness is quick-disconnect type that has a plug on the end.

The device made its first ice in about 3 hours, some reviews do state that it takes 24 hours or so for the built in thermostat to work but that wasn't the case with mine. Local parts houses want $120.00 USD for this exact same unit, you can get it on Amazon for $40+/- and install it in 15 minutes. I saved the old unit and extra parts that came with the new unit for future use (parts salvage) if needed.

Update: 08/20/2012
While everything above is accurate the unit has failed in the...

Click to Editorial Reviews

Whirlpool W10208631A Filter

Perfect Fit
This was the exact fit for my appliance - microwave with built in vent hood. Service from vendor was excellent. Came well packaged and no damage.

luv it
wasn't sure that it will fit my maytag microwave but it turns out to be a perfect fit. Should have ordered more to save on shipping but will definite order more in the future!!

Whirlpool microwave filter
I was thrilled to find this since my original filter fell behind the stove when I tried to reinsert it where it will remain in perpetuity! Thank you Amazon and the supplier from which you obtained it!

Click to Editorial Reviews